2.3 Led buzzer installation

ℹ️ 📕Quick Start Guide

This short PDF guide gives you an overview of the most important steps while installing a Led-Buzzer
The quick start guide is available by clicking here.

1 - Unpacking and access to connection 

• 1 - Unpack your led-buzzer

The default sound is 90 dB

3 - Connect the Flash Beacon to the smart display cable

To connect the Output cable and the flash beacon extension cable

• Connect   to Out1

• Connect   to GNDO1

4 - Connect the Flash Beacon to the Processing unit main cable

To use the Flash Beacon, activate the output mode "Warning Device"

ℹ️ To activate the output mode, follow the instructions in the Outputs' management