4.2 Datasheet - Checklist

Please find the PDF version at this link.

Description

The Blaxtair Checklist is a tool used to ensure compliance with safety regulations and standards in workplaces. It consists of a series of questions that guide employers and employees in identifying potential hazards, assessing safety practices, and implementing corrective measures to prevent workplace injuries and accidents.

 The checklist system consists of: 

• a smart display installed on a vehicule with an optional PIN code access and set of checklist questions

• an online web dashboard to administrate the vehicle fleet equiped with the checklist, create accounts and analyse reports

The user manual providing necessary information to install and operate the Blaxtair Checklist System is presented here.

THE BLAXTAIR CHECK LIST IS TO BE USED AS A SAFETY TOOL BUT DOES NOT REPLACE THE NEED FOR DRIVERS TO COMPLY WITH THE RULES OF THE ROAD, OSHA RULES AND REGULATIONS AND OTHER DRIVING SAFETY PRACTICES AND STANDARDS.

Product versions

The Blaxtair checklist can either be installed : 

• Stand alone : Smart AI display with its craddle installed on the vehicule. The smart display is touchscreen. It allows to answer the questions.

• Embedded to BXTO : The display of BXTO is replaced by the Smart AI display of the checklist. After filling the checklist, the smart display switchs to the BXT Origin detection live view. The checklist can be installed on an existing BXTO. A software update might be required.

The blaxtair checklist needs a 12-32VDC power. 

The smart diplay datasheet is presented here. This document presents certification & approvals, installation and configuration notes with dimensions of the system, technical specifications (electrical, mechanical, environmental)

Features

The Blaxtair Checklist features are presented below:

• PIN CODE FEATURE: allows to identify the user of the vehicule. This feature can be enabled or disabled via the checklist dashboard. If PIN CODE is activated, it will be requested at each key off/ key on and can therefore serve as an access control

• QUESTIONS FEATURE: allows to perform and inspection of the vehicule depending on the answers to a set of questions.

  • The questions can be either critical or not. The critical questions are those that control if the inspection is failed or succeded.

  • The questions can require or induce an interaction with the vehicle. 

• DISCRETE OUTPUT FEATURE: the checklist provides an output signal.
  Depending on the type of questions and answers, the ouput signal can be either 12V or 0V.
  The use of this ouput is the exclusive responsability of the customer. For instance, this output could be used to allow movement/ engine start or not - this choice and related connection is under customer’s responsibility. Slowdown system is NOT provided in the checklist equipement.

• NOTIFICATION FEATURE: allows to notify by email the Company manager in case of failed checklist. This allows to plan and automatise the maintenance of the vehicules. This feature can be enabled or disabled via the checklist dashboard.

• DASHBOARD FEATURE: 

  • Define the checklist fleet (users, vehicules, questions)

  • Monitor the state of the inspections depending on the answers to the checklist.

Needs and requirements

The Blaxtair checklist to work it is MANDATORY to have 4G or WIFI connection for: 

• Setting up of the checklist (first configuration for example)

• Updating content of the checklist (change of questions for exemple)

• Sending reports to the checklist dashboard

The blaxtair checklist needs a 12-32VDC power. 

Note

The checklist can still be answered in case of absence of connection. The validated report will be sent afterwards when the connection is retrieved.

Ordering information