Skip to main content
Skip table of contents

4.4.1 Format USB flash drive

You must format the USB flash drive in FAT32 to allow the Blaxtair Origin processing unit to detect it.

When you buy a commercial USB stick, it is usually in FAT32 or NTFS format.

In case your USB flash drive is not in the correct format, here is a procedure to format it to FAT32. 

  • 1 - Plug in the USB flash drive to your PC 

  • 2 - Open the windows file explorer

  • 3 - Right-click on the USB flash drive and click on Format

image-20240704-122759.png

  • 4 - Choose FAT32 in File system

image-20240704-122808.png

  • 5 - Put "ARCURE" in Volume label

image-20240704-122813.png

  • 6 - Leave the other fields with the default values.

  • 7 - Click on Start and accept the pop-up (the key data will be lost)

image-20240704-122816.png

  • 8 - Wait for the end of the formatting

image-20240704-122820.png

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.

Contact Support Close